Electrical Engineering Project of Jewish General Hospital Research Paper

Electrical plan Project of Jewish General Hospital - Research Paper ExampleThe purpose of this project was to exercise extensive repairs to the old emergency generator 1 located in the basement floor of the Jewish General Hospital (JGH). Many of these repairs consisted of replacing the starters of the generator, replacing the hoses and probes for temperature and pressure, and replacing the wiring of the generators engine. In addition, the alternator had to be dismantled in order for Hewitt Equipment Limited Inc. to verify it, clean it, and replace the bearings. However, we realized that it would be impossible for Hewitt Inc. workers to move the alternator out of its present location due to the fact that it was too big compared to the launching door of that inhabit. Therefore, my role as a project manager was to contact an entrepreneur that will relieve oneself a new opening as sanitary as inst each(prenominal) new doors in that room in order for Hewitt Inc. workers to be able t o move the alternator out the room without any issues. To do so, I first had to contact an designer known as David Gordon from Rubin & Rotman associates for drawings of the proposed opening and the dimensions of the new doors. For example, Mr. Gordon recommended that only a double door made out of insulated with thermal breezes must be inst in alled in the generators room. He also mentioned that the double door must have an opening angle of 180 degrees as well as a fire resistance of 90 minutes.Furthermore, I had to approve the drawings sent by the architect before proceeding with the project and fill out a direct purchase requisition of $4500 for all of the professional services in architecture. It was important to know that the architect was also responsible for coordinating all of the architectural work, which consisted of a new opening and the installation of new doors in the generators room, with the subcontractors.